APR Performance

***Direct OEM Replacement*** ****Fits Z06 ONLY****

APR Carbon Fiber Wheel Arch Modings are the perfect answer to aerodynamically tune the handling for the front of a car.  APR Wheel Arch Modings help increase front downforce at high speeds as well as re-direct airflow away from the wheel wells. The added downforce stabilizes the cars chassis during hard cornering and increases traction for faster lap times.

Features:

• Carbon Fiber Construction
  This component is formed in the autoclave at high temperatures using pre-pregnated carbon fiber manufacturing processes, for high strength and low weight.
• UV Resistant Coating
  Each Air Duct is finished with UV-resistant clear-coat paint for resistance against various environmental conditions (take care of this as you would take care of your vehicle's paint finish - polish then coat with good-quality wax or synthetic protectant).

The Track Pack Front Air Dam / Splitter  features a set of add-on Front Bumper Canards and Spats that can be attached to both ends of the splitter. The canards and spats help to redirect airflow away from the wheel wells to reduce drag, as well as improve the effectiveness of the splitter to maximize downforce. 

The APR Performance Front Air Dam integrates with the factory front bumper to:
- Reduce lift.
- Increase front-end stability.
- Improve high-speed cornering grip

Underbody components such as front air dams, undertrays, and rear diffusers are essential for maximizing aerodynamic performance. 

APR Side Rocker Extensions are the next step to help aerodynamically tune the handling of a car. Made of lightweight and durable carbon fiber composites, APR Side Rocker Extensions help reduce lift at high speeds by preventing air at the sides of the car from rolling underneath the car. The reduced lift helps to stabilize the car during high-speed cornering and helps to increase traction for faster lap times.

Features:

• Carbon Fiber Construction
  All APR Side Rocker Extensions are made in carbon fiber composites for lightweight and high strength.
• Vehicle Specific Design
  APR Side Rocker Extensions are designed and manufactured for specific vehicles for perfect fitment.
• Mounting Hardware Included
  Screws, nuts, and washers are included to allow you to install the APR Side Rocker Extensions to your car.

****Fits Both C7 Stingray and C7 Z06***

Diffusers work in conjunction with other aerodynamic components of a car to help produce downforce. Because a car displaces air as it moves forward, the air molecules in the rear of the car get disrupted causing a vacuum of low pressure air.

To help channel the high speed air flow coming from underneath the car, diffusers redirects the high speed air flow to transition smoothly transition into the low pressure vacuum in the rear. This encourages a smoother flowing air flow underneath the car and allows better performance from other aerodynamic components such as aerodynamic wings.

***Fits C7 ZO6 ONLY*** ( Does not Fit Standard C7)

The Rear Deck Spoiler is an aerodynamic component that can be used alone or in conjunction with other aerodynamic components to improve the overall efficiency of a vehicle's aerodynamic package. The APR Performance Rear Deck Spoiler integrates with the vehicle's rear deck to:
- Reduce rear-end lift and increase high-speed cornering grip (the magnitude varies depending on a vehicle's shape).
- Increase downforce and reduce drag when used with other aerodynamic components (i.e. rear wing, rear diffuser, etc.).

Features:

• Adjustable wickerbill  
• Factory-like fitment
  This vehicle-specific component is designed to match the contours of the vehicle's rear deck area, for a factory-like fitment.
• Carbon Fiber Construction
  This component is formed in the autoclave at high temperatures using pre-pregnated carbon fiber manufacturing processes, for high strength and low weight.
• UV Resistant Coating
  Each Rear Deck Spoiler is finished with UV-resistant clear-coat paint for resistance against various environmental conditions (take care of this as you would take care of your vehicle's paint finish - polish then coat with good-quality wax or synthetic protectant).
• Mounting Hardware Included
  Screws, nuts and bolts are all included to allow you to install the APR Rear Deck Spoiler to your vehicle.

***Direct OEM Replacement*** 

Excessive heat can cause major and expensive  damage to critical components in a car. Engine bays, radiators, brakes, transmissions, and differentials all need good air flow to help transfer away unwanted heat. APR Fender Vents help reduce high pressure air that builds up in the wheel wells . Built using pre-preg. carbon fiber reinforced polymer (CFRP) composite materials for superior strength-to-weight ratio, APR Fender Vents add both function and "lightness" where it counts.

Features:

• Carbon Fiber Construction
  This component is formed in the autoclave at high temperatures using pre-pregnated carbon fiber manufacturing processes, for high strength and low weight.
• UV Resistant Coating
  Each Air Duct is finished with UV-resistant clear-coat paint for resistance against various environmental conditions (take care of this as you would take care of your vehicle's paint finish - polish then coat with good-quality wax or synthetic protectant).

***Direct OEM Replacement***

Excessive heat can cause major and expensive damage to critical components in a car. Engine bays, radiators, brakes, transmissions, and differentials all need good air flow to help transfer away unwanted heat. APR Air Ducts help bring fresh cooling air to different areas that need additional cooling. Built using pre-preg. carbon fiber reinforced polymer (CFRP) composite materials for superior strength-to-weight ratio, APR Air Ducts add both function and "lightness" where it counts.

Features:

• Carbon Fiber Construction
  This component is formed in the autoclave at high temperatures using pre-pregnated carbon fiber manufacturing processes, for high strength and low weight.
• UV Resistant Coating
  Each Air Duct is finished with UV-resistant clear-coat paint for resistance against various environmental conditions (take care of this as you would take care of your vehicle's paint finish - polish then coat with good-quality wax or synthetic protectant).

****Fits Both Standard C7 and C7 Z06****

Dress-up the exterior with carbon fiber, molded to precise dimensions that only pre-preg. materials can achieve.  These parts are exotic-looking, race-inspired, and are unmatched in quality.

Features:

• Pre-preg. Carbon Fiber Manufacturing Process
  Exterior / Body Components are vacuum-bagged and cured in the autoclave at high temperatures, ensuring quality, durability, and extremely-high strengh-to-weight ratios.
• Fade-Resistant Clear Coat
  Exterior / Body Components are finished with UV-stable, production clear coat paint, then individually hand-polished to a brilliant shine.
• Easy Installation
  Exterior / Body Components are designed to factory specifications for easy installation and clean fit and finish.

Dress-up the exterior with carbon fiber, molded to precise dimensions that only pre-preg. materials can achieve.  These parts are exotic-looking, race-inspired, and are unmatched in quality.

Features:

• Pre-preg. Carbon Fiber Manufacturing Process
  Exhaust Heat Shields are vacuum-bagged and cured in the autoclave at high temperatures, ensuring quality, durability, and extremely-high strengh-to-weight ratios.
• Fade-Resistant Clear Coat
  Exhaust Heat Shields are finished with UV-stable, production clear coat paint, then individually hand-polished to a brilliant shine.
• Easy Installation
  Exhaust Heat Shields are designed to factory specifications for easy installation and clean fit and finish.

With a span of 67 or 61 inches and a height of 13 inches, the GTC-300 is an adjustable wing that means serious business. The GTC-300 3D airfoil shape allows for optimal airflow that reduces drag yet supplies an effective amount of downforce. Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design.

Each GTC Series airfoil is composed of lightweight and durable carbon fiber reinforced polymer (CFRP) composite materials. These airfoils contain pre-pregnated woven carbon fiber sheets for superior strength and low weight. All CFRP airfoils are made using pre-pregnated composite manufacturing processes (i.e. high-temperature autoclave and vacuum bagging) in high-quality aluminum billet molds.

Supporting the airfoils are 10mm "aircraft grade" 6061 billet aluminum pedestals that come in a flat black powder coat finish.

With a span of 67 or 61 inches and a height of 13 inches, the GTC-300 is an adjustable wing that means serious business. The GTC-300 3D airfoil shape allows for optimal airflow that reduces drag yet supplies an effective amount of downforce. Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design.

Each GTC Series airfoil is composed of lightweight and durable carbon fiber reinforced polymer (CFRP) composite materials. These airfoils contain pre-pregnated woven carbon fiber sheets for superior strength and low weight. All CFRP airfoils are made using pre-pregnated composite manufacturing processes (i.e. high-temperature autoclave and vacuum bagging) in high-quality aluminum billet molds.

Supporting the airfoils are 10mm "aircraft grade" 6061 billet aluminum pedestals that come in a flat black powder coat finish.

APR Side Rocker Extensions are the next step to help aerodynamically tune the handling of a car. Made of lightweight and durable carbon fiber composites, APR Side Rocker Extensions help reduce lift at high speeds by preventing air at the sides of the car from rolling underneath the car. The reduced lift helps to stabilize the car during high-speed cornering and helps to increase traction for faster lap times.

Features:

• Carbon Fiber Construction
  All APR Side Rocker Extensions are made in carbon fiber composites for lightweight and high strength.
• Vehicle Specific Design
  APR Side Rocker Extensions are designed and manufactured for specific vehicles for perfect fitment.
• Mounting Hardware Included
  Screws, nuts, and washers are included to allow you to install the APR Side Rocker Extensions to your car.

Dress-up the exterior with carbon fiber, molded to precise dimensions that only pre-preg materials can achieve.  These parts are exotic-looking, race-inspired, and are unmatched in quality.

Features:

• Pre-preg. Carbon Fiber Manufacturing Process
  Exterior Components are vacuum-bagged and cured in the autoclave at high temperatures, ensuring quality, durability, and extremely-high strengh-to-weight ratios.
• Fade-Resistant Clear Coat
   Exterior Components are finished with UV-stable, production clear coat paint, then individually hand-polished to a brilliant shine.
• Easy Installation
  Exterior Components are designed to factory specifications for easy installation and clean fit and finish.

APR Front Bumper Canards are the perfect answer to aerodynamically tune the handling for the front of a car. Made of lightweight and durable carbon graphite composites, APR Front Bumper Canards help increase front downforce at high speeds. The added downforce stabilizes the cars chassis during hard cornering and increases traction for faster lap times.

Features:

• Carbon Fiber Construction
  These APR Front Bumper Canards are made using pre-pregnated carbon fiber manufacturing processes, for high strength and low weight.
• UV Resistant Coating
  Each APR Front Bumper Canard is made with UV-stable epoxy and clear-coat materials for resistance against fading.
• Mounting Hardware Included
  Screws, nuts and bolts are all included to allow you to install the APR Front Bumper Canards to your car.

Underbody components such as front air dams, undertrays, and rear diffusers are essential for maximizing aerodynamic performance.

The APR Performance Front Air Dam integrates with the factory front bumper to:
- Reduce lift.
- Increase front-end stability.
- Improve high-speed cornering grip
This Front Air Dam also utilizes a built-in aerodynamic splitter design that creates a high-pressure region of air atop the protruding surface, further reducing lift and increasing net downforce.

Features:

- Aluminum Skid plates 

***Fits Factory wing only***

All wing pedestals are constructed with billet 6061 aircraft aluminum. They have been designed to change the height of the wing without drilling a new set of mounting holes for the trunk. This simple modification can raise or lower the height of your airfoil for optimum positioning of clean air contact with wing foils.

These Gurney Flaps are super lightweight, made in carbon fiber using the pre-pregnated "dry" carbon process, and conform perfectly to the contours of the Cayman GT4-airfoil. They are easily attached using the included double-sided tape.

Diffusers work in conjunction with other aerodynamic components of a car to help produce downforce. Because a car displaces air as it moves forward, the air molecules in the rear of the car get disrupted causing a vacuum of low pressure air.

To help channel the high speed air flow coming from underneath the car, diffusers redirects the high speed air flow to transition smoothly transition into the low pressure vacuum in the rear. This encourages a smoother flowing air flow underneath the car and allows better performance from other aerodynamic components such as aerodynamic wings.

Spanning 71 inches, the GTC-500 Carbon Fiber Adjustable Wing is the largest wing available in APR's catalog. With its optimized 3D airfoil shape, the GTC-500 is perfect for high speed touring applications and supplies an ample amount of downforce without causing excess drag. All GTC Series wings feature an aerodynamic 3D designed airfoil shape to obtain the optimal balance of downforce. This design allows for a reduction in drag, yet maintains an ideal level of downforce. Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design.

Each GTC Series airfoil is composed of lightweight and durable carbon fiber reinforced polymer (CFRP) composite materials. These airfoils contain pre-pregnated woven carbon fiber sheets for superior strength and low weight. All CFRP airfoils are made using pre-pregnated composite manufacturing processes (i.e. high-temperature autoclave and vacuum bagging) in high-quality aluminum billet molds.

Supporting the airfoils are 10mm "aircraft grade" 6061 billet aluminum pedestals that come in a flat black powder coat finish.

Note: Adapts to Factory Wing Location

Spanning 71 inches, the GTC-500 Carbon Fiber Adjustable Wing is the largest wing available in APR's catalog. With its optimized 3D airfoil shape, the GTC-500 is perfect for high speed touring applications and supplies an ample amount of downforce without causing excess drag. All GTC Series wings feature an aerodynamic 3D designed airfoil shape to obtain the optimal balance of downforce. This design allows for a reduction in drag, yet maintains an ideal level of downforce. Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design.

Each GTC Series airfoil is composed of lightweight and durable carbon fiber reinforced polymer (CFRP) composite materials. These airfoils contain pre-pregnated woven carbon fiber sheets for superior strength and low weight. All CFRP airfoils are made using pre-pregnated composite manufacturing processes (i.e. high-temperature autoclave and vacuum bagging) in high-quality aluminum billet molds.

Supporting the airfoils are 10mm "aircraft grade" 6061 billet aluminum pedestals that come in a flat black powder coat finish.

Note: Adapts to Factory Wing Location

APR Front Bumper Canards are the perfect answer to aerodynamically tune the handling for the front of a car. Made of lightweight and durable carbon graphite composites, APR Front Bumper Canards help increase front downforce at high speeds. The added downforce stabilizes the cars chassis during hard cornering and increases traction for faster lap times.

Features:

• Carbon Fiber Construction
  These APR Front Bumper Canards are made using pre-pregnated carbon fiber manufacturing processes, for high strength and low weight.
• UV Resistant Coating
  Each APR Front Bumper Canard is made with UV-stable epoxy and clear-coat materials for resistance against fading.
• Mounting Hardware Included
  Screws, nuts and bolts are all included to allow you to install the APR Front Bumper Canards to your car.

Underbody components such as front air dams, undertrays, and rear diffusers are essential for maximizing aerodynamic performance.

The APR Performance Front Air Dam integrates with the factory front bumper to:
- Reduce lift.
- Increase front-end stability.
- Improve high-speed cornering grip
This Front Air Dam also utilizes a built-in aerodynamic splitter design that creates a high-pressure region of air atop the protruding surface, further reducing lift and increasing net downforce.

Features:

- Aluminum Skid plates 

Diffusers work in conjunction with other aerodynamic components of a car to help produce downforce. Because a car displaces air as it moves forward, the air molecules in the rear of the car get disrupted causing a vacuum of low pressure air.

To help channel the high speed air flow coming from underneath the car, diffusers redirects the high speed air flow to transition smoothly transition into the low pressure vacuum in the rear. This encourages a smoother flowing air flow underneath the car and allows better performance from other aerodynamic components such as aerodynamic wings.

Spanning 71 inches, the GTC-500 Carbon Fiber Adjustable Wing is the largest wing available in APR's catalog. With its optimized 3D airfoil shape, the GTC-500 is perfect for high speed touring applications and supplies an ample amount of downforce without causing excess drag. All GTC Series wings feature an aerodynamic 3D designed airfoil shape to obtain the optimal balance of downforce. This design allows for a reduction in drag, yet maintains an ideal level of downforce. Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design.

Each GTC Series airfoil is composed of lightweight and durable carbon fiber reinforced polymer (CFRP) composite materials. These airfoils contain pre-pregnated woven carbon fiber sheets for superior strength and low weight. All CFRP airfoils are made using pre-pregnated composite manufacturing processes (i.e. high-temperature autoclave and vacuum bagging) in high-quality aluminum billet molds.

Supporting the airfoils are 10mm "aircraft grade" 6061 billet aluminum pedestals that come in a flat black powder coat finish.

All GT Series wings feature an all-new, low-drag, aerodynamic 2D designed airfoil shape. The "2D" design allows the wing to maintain a consistent level of downforce across its entire span. Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design.

Each GT Series airfoil is composed of lightweight and durable carbon fiber reinforced polymer (CFRP) composite materials. These airfoils contain pre-pregnated woven carbon fiber sheets for superior strength and low weight. All CFRP airfoils are made using pre-pregnated composite manufacturing processes (i.e. high-temperature autoclave and vacuum bagging) in high-quality aluminum billet molds.

Gurney flaps are included and pre-installed with every GT-250 wing. These are super lightweight, made using pre-pregnated carbon fiber processes.

Spanning 60.5 inches and a height of 10 inches, the New GTC-200 adjustable wing offers the perfect amount of downforce for midsize and compact cars.

Each GTC Series airfoil is composed of lightweight and durable carbon fiber reinforced polymer (CFRP) composite materials. These airfoils contain pre-pregnated woven carbon fiber sheets for superior strength and low weight. All CFRP airfoils are made using pre-pregnated composite manufacturing processes (i.e. high-temperature autoclave and vacuum bagging) in high-quality aluminum billet molds.

Supporting the airfoils are 10mm "aircraft grade" 6061 billet aluminum pedestals that come in a flat black powder coat finish.

To combat the effects of front end lift, APR Front Wind Splitters are utilized to give extra traction and control in the front of a car. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. With low pressure below the car, the effect of lift is reduced and a driver can gain from the extra traction and control.

Features:

• Carbon Fiber Reinforcement
  All APR Front Wind Splitters are reinforced with sheets of carbon fiber.
• Fully Functional Undertray
  Our Front Wind Splitters are not just add on cosmetic pieces. Every APR Front Wind Splitter completely covers the entire area below a cars front bumper. This allows for smoother air flow below the front bumper, creating more efficient downforce.
• Support Rods Included
  Supporting every APR Front Wind Splitters are stainless steel Support Rods.

All GT Series wings feature an all-new, low-drag, aerodynamic 2D designed airfoil shape. The "2D" design allows the wing to maintain a consistent level of downforce across its entire span. Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design.

Each GT Series airfoil is composed of lightweight and durable carbon fiber reinforced polymer (CFRP) composite materials. These airfoils contain pre-pregnated woven carbon fiber sheets for superior strength and low weight. All CFRP airfoils are made using pre-pregnated composite manufacturing processes (i.e. high-temperature autoclave and vacuum bagging) in high-quality aluminum billet molds.

Gurney flaps are included and pre-installed with every GT-250 wing. These are super lightweight, made using pre-pregnated carbon fiber processes.

All GT Series wings feature an all-new, low-drag, aerodynamic 2D designed airfoil shape. The "2D" design allows the wing to maintain a consistent level of downforce across its entire span. Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design.

Each GT Series airfoil is composed of lightweight and durable carbon fiber reinforced polymer (CFRP) composite materials. These airfoils contain pre-pregnated woven carbon fiber sheets for superior strength and low weight. All CFRP airfoils are made using pre-pregnated composite manufacturing processes (i.e. high-temperature autoclave and vacuum bagging) in high-quality aluminum billet molds.

Gurney flaps are included and pre-installed with every GT-250 wing. These are super lightweight, made using pre-pregnated carbon fiber processes.

All GT Series wings feature an all-new, low-drag, aerodynamic 2D designed airfoil shape. The "2D" design allows the wing to maintain a consistent level of downforce across its entire span. Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design.

Each GT Series airfoil is composed of lightweight and durable carbon fiber reinforced polymer (CFRP) composite materials. These airfoils contain pre-pregnated woven carbon fiber sheets for superior strength and low weight. All CFRP airfoils are made using pre-pregnated composite manufacturing processes (i.e. high-temperature autoclave and vacuum bagging) in high-quality aluminum billet molds.

Gurney flaps are included and pre-installed with every GT-250 wing. These are super lightweight, made using pre-pregnated carbon fiber processes.

***All Front Wind Splitter are built to order. Built time is 2 Weeks***

To combat the effects of front end lift, APR Front Wind Splitters are utilized to give extra traction and control in the front of a car. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. With low pressure below the car, the effect of lift is reduced and a driver can gain from the extra traction and control.

Features:

• Carbon Fiber Reinforcement
  All APR Front Wind Splitters are reinforced with sheets of carbon fiber.
• Fully Functional Undertray
  Our Front Wind Splitters are not just add on cosmetic pieces. Every APR Front Wind Splitter completely covers the entire area below a cars front bumper. This allows for smoother air flow below the front bumper, creating more efficient downforce.
• Support Rods Included
  Supporting every APR Front Wind Splitters are stainless steel Support Rods.

***Fits F82 M4 Only***

APR Side Rocker Extensions are the next step to help aerodynamically tune the handling of a car. Made of lightweight and durable carbon fiber composites, APR Side Rocker Extensions help reduce lift at high speeds by preventing air at the sides of the car from rolling underneath the car. The reduced lift helps to stabilize the car during high-speed cornering and helps to increase traction for faster lap times.

Features:

• Carbon Fiber Construction
  All APR Side Rocker Extensions are made in carbon fiber composites for lightweight and high strength.
• Vehicle Specific Design
  APR Side Rocker Extensions are designed and manufactured for specific vehicles for perfect fitment.
• Mounting Hardware Included
  Screws, nuts, and washers are included to allow you to install the APR Side Rocker Extensions to your car.

With a span of 67 or 61 inches and a height of 13 inches, the GTC-300 is an adjustable wing that means serious business. The GTC-300 3D airfoil shape allows for optimal airflow that reduces drag yet supplies an effective amount of downforce. Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design.

Each GTC Series airfoil is composed of lightweight and durable carbon fiber reinforced polymer (CFRP) composite materials. These airfoils contain pre-pregnated woven carbon fiber sheets for superior strength and low weight. All CFRP airfoils are made using pre-pregnated composite manufacturing processes (i.e. high-temperature autoclave and vacuum bagging) in high-quality aluminum billet molds.

Supporting the airfoils are 10mm "aircraft grade" 6061 billet aluminum pedestals that come in a flat black powder coat finish.

Special Note: Mounting bases sit 23" apart (inner side of the upper brackets).

***All Front Wind Splitter are built to order. Built time is 2 Weeks***

To combat the effects of front end lift, APR Front Wind Splitters are utilized to give extra traction and control in the front of a car. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. With low pressure below the car, the effect of lift is reduced and a driver can gain from the extra traction and control.

Features:

• Carbon Fiber Reinforcement
  All APR Front Wind Splitters are reinforced with sheets of carbon fiber.
• Fully Functional Undertray
  Our Front Wind Splitters are not just add on cosmetic pieces. Every APR Front Wind Splitter completely covers the entire area below a cars front bumper. This allows for smoother air flow below the front bumper, creating more efficient downforce.
• Support Rods Included
  Supporting every APR Front Wind Splitters are stainless steel Support Rods.