Vorsteiner

The 107’s mesh design is a modern take on the classic mesh often seen in 70’s and 80’s era motorsports scene. Our modern take is an alternating mesh that combines two five-split spoke designs creating the mesh appearance.

The Venomrex VR-F01 Forged Monoblock Wheel

Our Venom Rex F01 looks to combine our distinct and innovative design methods with the robust and rugged styling of traditional truck wheels. Combining those two concepts to create one of the lightest Forged wheels available.

Warranty

With proper care, professional installation, and an assumption of reasonable use on public roads & highways, Vorsteiner Flow Forged Wheels carry a Lifetime Warranty against manufacturer and structural defect. In addition, Vorsteiner offers a full 2-Year cosmetic warranty on the factory painted finish.

All warranty claims will be limited to product repair or replacement at Vorsteiner’s discretion, and does not include reimbursement for any costs associate with labor, shipping, transportation, or loss of use. Claims will only be accepted with a dated proof of purchase and must be processed through the original dealer or distributor where the wheels were purchased and installed. Warranty is only valid to the original purchaser and must have been installed by an Authorized Vorsteiner Dealer.

Installation Instructions

1. Test fit each wheel (front and rear) before mounting and balancing any tires in order to ensure proper fitment to the vehicle as well as for adequate clearance between any brake and/or suspension components. Returns or exchanges will not be approved based on fitment after tires have been mounted to the wheels.
2. Observe the tire manufacturer’s suggested tire size based on rim width. Clearance between fenders, fender linings, and suspension components should be checked before mounting opposite side tire. Before the vehicle is released to the customer, the vehicle should be checked for tire interference while on the rack, as well as on the road by driving at slow speeds (up to 10 mph) and turning in both directions at full steering lock.
3. All Venomrex wheels are engineered applications specific for use with factory hardware. The use of hub centric rings, spacers, or adaptors to alter the fitment of the wheel is not authorized by Venomrex. When fitted to vehicles not properly validated or approved by our engineers, the installer will be fully responsible for the performance and final outcome.
4. Tires should not be inflated in excess of 50 psi in order to seat the tire bead. Please follow the tire manufacturer’s recommended driving pressures before releasing the vehicle to the customer.
5. Wheel bolts/lugs should be tightened by hand, in a progressive crisscross pattern, and without the use of air powered or electric impact wrenches. Always follow the vehicle manufacturer’s recommended torque specifications. All wheels should be fully torqued after the full weight of the vehicle is lowered onto the suspension.
6. Please ensure that the vehicle is returned to the installer within 50 – 100 miles of use for a visual inspection, and recheck for proper tire inflation and torque specifications.

Gallery

The Venomrex VR-F02 Forged Monoblock Wheel

Our Venom Rex F02 looks to combine our distinct and innovative design methods with the robust and rugged styling of traditional truck wheels. Combining those two concepts to create one of the lightest Forged wheels available.

Warranty

With proper care, professional installation, and an assumption of reasonable use on public roads & highways, Vorsteiner Flow Forged Wheels carry a Lifetime Warranty against manufacturer and structural defect. In addition, Vorsteiner offers a full 2-Year cosmetic warranty on the factory painted finish.

All warranty claims will be limited to product repair or replacement at Vorsteiner’s discretion, and does not include reimbursement for any costs associate with labor, shipping, transportation, or loss of use. Claims will only be accepted with a dated proof of purchase and must be processed through the original dealer or distributor where the wheels were purchased and installed. Warranty is only valid to the original purchaser and must have been installed by an Authorized Vorsteiner Dealer.

Installation Instructions

1. Test fit each wheel (front and rear) before mounting and balancing any tires in order to ensure proper fitment to the vehicle as well as for adequate clearance between any brake and/or suspension components. Returns or exchanges will not be approved based on fitment after tires have been mounted to the wheels.
2. Observe the tire manufacturer’s suggested tire size based on rim width. Clearance between fenders, fender linings, and suspension components should be checked before mounting opposite side tire. Before the vehicle is released to the customer, the vehicle should be checked for tire interference while on the rack, as well as on the road by driving at slow speeds (up to 10 mph) and turning in both directions at full steering lock.
3. All Venomrex wheels are engineered applications specific for use with factory hardware. The use of hub centric rings, spacers, or adaptors to alter the fitment of the wheel is not authorized by Venomrex. When fitted to vehicles not properly validated or approved by our engineers, the installer will be fully responsible for the performance and final outcome.
4. Tires should not be inflated in excess of 50 psi in order to seat the tire bead. Please follow the tire manufacturer’s recommended driving pressures before releasing the vehicle to the customer.
5. Wheel bolts/lugs should be tightened by hand, in a progressive crisscross pattern, and without the use of air powered or electric impact wrenches. Always follow the vehicle manufacturer’s recommended torque specifications. All wheels should be fully torqued after the full weight of the vehicle is lowered onto the suspension.
6. Please ensure that the vehicle is returned to the installer within 50 – 100 miles of use for a visual inspection, and recheck for proper tire inflation and torque specifications.

Gallery

The Venomrex VR-602 Finished in Mystic Black

The Venomrex 602 combines our distinct and innovative design methods with the robust and rugged styling of traditional truck wheels. Our engineers have utilized the design elements to create one of the lightest 20" Flow Forged wheels available. The 20" VR-602 is designed for on and off road use for the the Ford F150 (2009+), the Ford Raptor, the Chevrolet Silverado, the GMC Sierra 1500, Lexus GX and the Dodge Ram.

Product Details

Product Info
Venom Rex 602
20" X 9"
ET 12 (Ford)
ET 18 (Lexus/Chevy/GMC/Dodge)
Mystic Black Finish
Flow Forged All Terrain Wheel
Guarantee Fitment

Vehicle Applications
2009+ F150
2009-2014 Raptor
2017 Raptor
2007+ Chevrolet Silverado 1500
2007+ GMC Sierra 1500
2019 Dodge Ram
Lexus GX460 (2010+)
Lexus GX470 (2003 - 2009)

Wheel Specs
Size: 20X9.0
PCD: 6X139.7 (Lexus/Chevy/GMC/Dodge)
PCD: 6X135 (Ford)
Offset: ET 12 (Ford)
Offset: ET 18 (Lexus/Chevy/GMC/Dodge)
Backspacing: 5.5" (Ford)
Backspacing: 4.5" (Lexus/Chevy/GMC/Dodge)
Bore: 87.1 (Ford)
Bore: 106 (Lexus/Chevy/GMC/Dodge)
Load Rating: 2,645 lbs

Warranty

With proper care, professional installation, and an assumption of reasonable use on public roads & highways, Vorsteiner Flow Forged Wheels carry a Lifetime Warranty against manufacturer and structural defect. In addition, Vorsteiner offers a full 2-Year cosmetic warranty on the factory painted finish.

All warranty claims will be limited to product repair or replacement at Vorsteiner’s discretion, and does not include reimbursement for any costs associate with labor, shipping, transportation, or loss of use. Claims will only be accepted with a dated proof of purchase and must be processed through the original dealer or distributor where the wheels were purchased and installed. Warranty is only valid to the original purchaser and must have been installed by an Authorized Vorsteiner Dealer.

Installation Instructions

1. Test fit each wheel (front and rear) before mounting and balancing any tires in order to ensure proper fitment to the vehicle as well as for adequate clearance between any brake and/or suspension components. Returns or exchanges will not be approved based on fitment after tires have been mounted to the wheels.
2. Observe the tire manufacturer’s suggested tire size based on rim width. Clearance between fenders, fender linings, and suspension components should be checked before mounting opposite side tire. Before the vehicle is released to the customer, the vehicle should be checked for tire interference while on the rack, as well as on the road by driving at slow speeds (up to 10 mph) and turning in both directions at full steering lock.
3. All Venomrex wheels are engineered applications specific for use with factory hardware. The use of hub centric rings, spacers, or adaptors to alter the fitment of the wheel is not authorized by Venomrex. When fitted to vehicles not properly validated or approved by our engineers, the installer will be fully responsible for the performance and final outcome.
4. Tires should not be inflated in excess of 50 psi in order to seat the tire bead. Please follow the tire manufacturer’s recommended driving pressures before releasing the vehicle to the customer.
5. Wheel bolts/lugs should be tightened by hand, in a progressive crisscross pattern, and without the use of air powered or electric impact wrenches. Always follow the vehicle manufacturer’s recommended torque specifications. All wheels should be fully torqued after the full weight of the vehicle is lowered onto the suspension.
6. Please ensure that the vehicle is returned to the installer within 50 – 100 miles of use for a visual inspection, and recheck for proper tire inflation and torque specifications.

360 View

Gallery

Ford Raptor 20" VR-602 Mystic Black

The Venomrex VR-602 Finished in Carbon Graphite

The Venomrex 602 combines our distinct and innovative design methods with the robust and rugged styling of traditional truck wheels. Our engineers have utilized the design elements to create one of the lightest 20" Flow Forged wheels available. The 20" VR-602 is designed for on and off road use for the the Ford F150 (2009+), the Ford Raptor, the Chevrolet Silverado, the GMC Sierra 1500, Lexus GX and the Dodge Ram.

Product Details

Product Info
Venom Rex 602
20" X 9"
ET 12 (Ford)
ET 18 (Lexus/Chevy/GMC/Dodge)
Carbon Graphite Finish
Flow Forged All Terrain Wheel
Guarantee Fitment

Vehicle Applications
2009+ F150
2009-2014 Raptor
2017 Raptor
2007+ Chevrolet Silverado 1500
2007+ GMC Sierra 1500
2019 Dodge Ram
Lexus GX460 (2010+)
Lexus GX470 (2003 - 2009)

Wheel Specs
Size: 20X9.0
PCD: 6X139.7 (Lexus/Chevy/GMC/Dodge)
PCD: 6X135 (Ford)
Offset: ET 12 (Ford)
Offset: ET 18 (Lexus/Chevy/GMC/Dodge)
Backspacing: 5.5" (Ford)
Backspacing: 4.5" (Lexus/Chevy/GMC/Dodge)
Bore: 87.1 (Ford)
Bore: 106 (Lexus/Chevy/GMC/Dodge)
Load Rating: 2,645 lbs

Warranty

With proper care, professional installation, and an assumption of reasonable use on public roads & highways, Vorsteiner Flow Forged Wheels carry a Lifetime Warranty against manufacturer and structural defect. In addition, Vorsteiner offers a full 2-Year cosmetic warranty on the factory painted finish.

All warranty claims will be limited to product repair or replacement at Vorsteiner’s discretion, and does not include reimbursement for any costs associate with labor, shipping, transportation, or loss of use. Claims will only be accepted with a dated proof of purchase and must be processed through the original dealer or distributor where the wheels were purchased and installed. Warranty is only valid to the original purchaser and must have been installed by an Authorized Vorsteiner Dealer.

Installation Instructions

1. Test fit each wheel (front and rear) before mounting and balancing any tires in order to ensure proper fitment to the vehicle as well as for adequate clearance between any brake and/or suspension components. Returns or exchanges will not be approved based on fitment after tires have been mounted to the wheels.
2. Observe the tire manufacturer’s suggested tire size based on rim width. Clearance between fenders, fender linings, and suspension components should be checked before mounting opposite side tire. Before the vehicle is released to the customer, the vehicle should be checked for tire interference while on the rack, as well as on the road by driving at slow speeds (up to 10 mph) and turning in both directions at full steering lock.
3. All Venomrex wheels are engineered applications specific for use with factory hardware. The use of hub centric rings, spacers, or adaptors to alter the fitment of the wheel is not authorized by Venomrex. When fitted to vehicles not properly validated or approved by our engineers, the installer will be fully responsible for the performance and final outcome.
4. Tires should not be inflated in excess of 50 psi in order to seat the tire bead. Please follow the tire manufacturer’s recommended driving pressures before releasing the vehicle to the customer.
5. Wheel bolts/lugs should be tightened by hand, in a progressive crisscross pattern, and without the use of air powered or electric impact wrenches. Always follow the vehicle manufacturer’s recommended torque specifications. All wheels should be fully torqued after the full weight of the vehicle is lowered onto the suspension.
6. Please ensure that the vehicle is returned to the installer within 50 – 100 miles of use for a visual inspection, and recheck for proper tire inflation and torque specifications.

360 View

Gallery

Ford Raptor VR-602 Carbon Graphite

The Venomrex VR-602 Finished in Desert Bronze

The Venomrex 602 combines our distinct and innovative design methods with the robust and rugged styling of traditional truck wheels. Our engineers have utilized the design elements to create one of the lightest 20" Flow Forged wheels available. The 20" VR-602 is designed for on and off road use for the the Ford F150 (2009+), the Ford Raptor, the Chevrolet Silverado, the GMC Sierra 1500, Lexus GX and the Dodge Ram.

Product Details

Product Info
Venom Rex 602
20" X 9"
ET 12 (Ford)
ET 18 (Lexus/Chevy/GMC/Dodge)
Desert Bronze Finish
Flow Forged All Terrain Wheel
Guarantee Fitment

Vehicle Applications
2009+ F150
2009-2014 Raptor
2017 Raptor
2007+ Chevrolet Silverado 1500
2007+ GMC Sierra 1500
2019 Dodge Ram
Lexus GX460 (2010+)
Lexus GX470 (2003 - 2009)

Wheel Specs
Size: 17X9.0
Size: 20X9.0
PCD: 6X139.7 (Lexus/Chevy/GMC)
PCD: 6X135 (Ford)
Offset: ET 12 (Ford)
Offset: ET 18 (Lexus/Chevy/GMC/Dodge)
Backspacing: 5.5" (Ford)
Backspacing: 4.5" (Lexus/Chevy/GMC/Dodge)
Bore: 87.1 (Ford)
Bore: 106 (Lexus/Chevy/GMC/Dodge)
Load Rating: 2,645 lbs

Warranty

With proper care, professional installation, and an assumption of reasonable use on public roads & highways, Vorsteiner Flow Forged Wheels carry a Lifetime Warranty against manufacturer and structural defect. In addition, Vorsteiner offers a full 2-Year cosmetic warranty on the factory painted finish.

All warranty claims will be limited to product repair or replacement at Vorsteiner’s discretion, and does not include reimbursement for any costs associate with labor, shipping, transportation, or loss of use. Claims will only be accepted with a dated proof of purchase and must be processed through the original dealer or distributor where the wheels were purchased and installed. Warranty is only valid to the original purchaser and must have been installed by an Authorized Vorsteiner Dealer.

Installation Instructions

1. Test fit each wheel (front and rear) before mounting and balancing any tires in order to ensure proper fitment to the vehicle as well as for adequate clearance between any brake and/or suspension components. Returns or exchanges will not be approved based on fitment after tires have been mounted to the wheels.
2. Observe the tire manufacturer’s suggested tire size based on rim width. Clearance between fenders, fender linings, and suspension components should be checked before mounting opposite side tire. Before the vehicle is released to the customer, the vehicle should be checked for tire interference while on the rack, as well as on the road by driving at slow speeds (up to 10 mph) and turning in both directions at full steering lock.
3. All Venomrex wheels are engineered applications specific for use with factory hardware. The use of hub centric rings, spacers, or adaptors to alter the fitment of the wheel is not authorized by Venomrex. When fitted to vehicles not properly validated or approved by our engineers, the installer will be fully responsible for the performance and final outcome.
4. Tires should not be inflated in excess of 50 psi in order to seat the tire bead. Please follow the tire manufacturer’s recommended driving pressures before releasing the vehicle to the customer.
5. Wheel bolts/lugs should be tightened by hand, in a progressive crisscross pattern, and without the use of air powered or electric impact wrenches. Always follow the vehicle manufacturer’s recommended torque specifications. All wheels should be fully torqued after the full weight of the vehicle is lowered onto the suspension.
6. Please ensure that the vehicle is returned to the installer within 50 – 100 miles of use for a visual inspection, and recheck for proper tire inflation and torque specifications.

Gallery

Ford Raptor 20" Desert Bronze

360 View

The Venomrex VR-602 Finished in Coal Black

Online pre-orders will ship by December 31st 2020

The Venomrex 602 combines our distinct and innovative design methods with the robust and rugged styling of traditional truck wheels. Our engineers have utilized the design elements to create one of the lightest 17" Flow Forged wheels available. The VR-602 is designed for on and off road use for the the Ford F150 (2009+), the Ford Raptor, the Toyota Tacoma, the Toyota 4Runner, the Toyota FJ Cruiser, the Chevrolet Silverado and the GMC Sierra 1500.

The Toyota Tacoma and 4Runner wheel applications are hub-centric at 106.2 millimeters. The 12x1.5 Spline Lug Nut Kit offered by Venomrex for Toyota applications receive 5.5 turns when installed properly, approved within OEM Toyota specs. Running Venomrex Wheels with the Venomrex Spline Lug Nut Kit on all Toyota applications has been thoroughly tested on and off road with no known issues.

Product Details

Product Info
Venom Rex 602
17" X 9"
ET -12 (Toyota/Chevy/GMC)
ET 12 (Ford)
Coal Black Finish
Flow Forged All Terrain Wheel
Guarantee Fitment

Vehicle Applications
2009+ F150
2009-2014 Raptor
2017 Raptor
2002+ Toyota Tacoma
2002+ Toyota 4Runner
2007+ FJ Cruiser
2007+ Chevrolet Silverado 1500
2007+ GMC Sierra 1500
2019 Dodge Ram

Wheel Specs
Size: 17X9.0
PCD: 6X139.7 (Toyota/Chevy/GMC/Dodge)
PCD: 6X135 (Ford)
Offset: ET -12 (Toyota/Chevy/GMC)
Offset: ET 12 (Ford)
Backspacing: 5.5" (Ford)
Backspacing: 4.5" (Toyota/Chevy/GMC/Dodge)
Bore: 87.1 (Ford)
Bore: 106 (Toyota/Chevy/GMC/Dodge)
Load Rating: 2,645 lbs

Warranty

With proper care, professional installation, and an assumption of reasonable use on public roads & highways, Vorsteiner Flow Forged Wheels carry a Lifetime Warranty against manufacturer and structural defect. In addition, Vorsteiner offers a full 2-Year cosmetic warranty on the factory painted finish.

All warranty claims will be limited to product repair or replacement at Vorsteiner’s discretion, and does not include reimbursement for any costs associate with labor, shipping, transportation, or loss of use. Claims will only be accepted with a dated proof of purchase and must be processed through the original dealer or distributor where the wheels were purchased and installed. Warranty is only valid to the original purchaser and must have been installed by an Authorized Vorsteiner Dealer.

Installation Instructions

1. Test fit each wheel (front and rear) before mounting and balancing any tires in order to ensure proper fitment to the vehicle as well as for adequate clearance between any brake and/or suspension components. Returns or exchanges will not be approved based on fitment after tires have been mounted to the wheels.
2. Observe the tire manufacturer’s suggested tire size based on rim width. Clearance between fenders, fender linings, and suspension components should be checked before mounting opposite side tire. Before the vehicle is released to the customer, the vehicle should be checked for tire interference while on the rack, as well as on the road by driving at slow speeds (up to 10 mph) and turning in both directions at full steering lock.
3. All Venomrex wheels are engineered applications specific for use with factory hardware. The use of hub centric rings, spacers, or adaptors to alter the fitment of the wheel is not authorized by Venomrex. When fitted to vehicles not properly validated or approved by our engineers, the installer will be fully responsible for the performance and final outcome.
4. Tires should not be inflated in excess of 50 psi in order to seat the tire bead. Please follow the tire manufacturer’s recommended driving pressures before releasing the vehicle to the customer.
5. Wheel bolts/lugs should be tightened by hand, in a progressive crisscross pattern, and without the use of air powered or electric impact wrenches. Always follow the vehicle manufacturer’s recommended torque specifications. All wheels should be fully torqued after the full weight of the vehicle is lowered onto the suspension.
6. Please ensure that the vehicle is returned to the installer within 50 – 100 miles of use for a visual inspection, and recheck for proper tire inflation and torque specifications.

360 View

Gallery

Toyota 4Runner TRD Pro 17" VR-602 Coal Black

The Venomrex VR-602 Finished in Tungsten Graphite

Online pre-orders will ship by December 31st 2020

The Venomrex 602 combines our distinct and innovative design methods with the robust and rugged styling of traditional truck wheels. Our engineers have utilized the design elements to create one of the lightest 17" Flow Forged wheels available. The VR-602 is designed for on and off road use for the the Ford F150 (2009+), the Ford Raptor, the Toyota Tacoma, the Toyota 4Runner, the Toyota FJ Cruiser, the Chevrolet Silverado and the GMC Sierra 1500.

The Toyota Tacoma and 4Runner wheel applications are hub-centric at 106.2 millimeters. The 12x1.5 Spline Lug Nut Kit offered by Venomrex for Toyota applications receive 5.5 turns when installed properly, approved within OEM Toyota specs. Running Venomrex Wheels with the Venomrex Spline Lug Nut Kit on all Toyota applications has been thoroughly tested on and off road with no known issues.

Product Details

Product Info
Venom Rex 602
17" X 9"
ET -12 (Toyota/Chevy/GMC)
ET 12 (Ford)
Tungsten Graphite Finish
Flow Forged All Terrain Wheel
Guarantee Fitment

Vehicle Applications
2009+ F150
2009-2014 Raptor
2017 Raptor
2002+ Toyota Tacoma
2002+ Toyota 4Runner
2007+ FJ Cruiser
2007+ Chevrolet Silverado 1500
2007+ GMC Sierra 1500
2019 Dodge Ram

Wheel Specs
Size: 17X9.0
PCD: 6X139.7 (Toyota/Chevy/GMC/Dodge)
PCD: 6X135 (Ford)
Offset: ET -12 (Toyota/Chevy/GMC)
Offset: ET 12 (Ford)
Backspacing: 5.5" (Ford)
Backspacing: 4.5" (Toyota/Chevy/GMC/Dodge)
Bore: 87.1 (Ford)
Bore: 106 (Toyota/Chevy/GMC/Dodge)
Load Rating: 2,645 lbs

Warranty

With proper care, professional installation, and an assumption of reasonable use on public roads & highways, Vorsteiner Flow Forged Wheels carry a Lifetime Warranty against manufacturer and structural defect. In addition, Vorsteiner offers a full 2-Year cosmetic warranty on the factory painted finish.

All warranty claims will be limited to product repair or replacement at Vorsteiner’s discretion, and does not include reimbursement for any costs associate with labor, shipping, transportation, or loss of use. Claims will only be accepted with a dated proof of purchase and must be processed through the original dealer or distributor where the wheels were purchased and installed. Warranty is only valid to the original purchaser and must have been installed by an Authorized Vorsteiner Dealer.

Installation Instructions

1. Test fit each wheel (front and rear) before mounting and balancing any tires in order to ensure proper fitment to the vehicle as well as for adequate clearance between any brake and/or suspension components. Returns or exchanges will not be approved based on fitment after tires have been mounted to the wheels.
2. Observe the tire manufacturer’s suggested tire size based on rim width. Clearance between fenders, fender linings, and suspension components should be checked before mounting opposite side tire. Before the vehicle is released to the customer, the vehicle should be checked for tire interference while on the rack, as well as on the road by driving at slow speeds (up to 10 mph) and turning in both directions at full steering lock.
3. All Venomrex wheels are engineered applications specific for use with factory hardware. The use of hub centric rings, spacers, or adaptors to alter the fitment of the wheel is not authorized by Venomrex. When fitted to vehicles not properly validated or approved by our engineers, the installer will be fully responsible for the performance and final outcome.
4. Tires should not be inflated in excess of 50 psi in order to seat the tire bead. Please follow the tire manufacturer’s recommended driving pressures before releasing the vehicle to the customer.
5. Wheel bolts/lugs should be tightened by hand, in a progressive crisscross pattern, and without the use of air powered or electric impact wrenches. Always follow the vehicle manufacturer’s recommended torque specifications. All wheels should be fully torqued after the full weight of the vehicle is lowered onto the suspension.
6. Please ensure that the vehicle is returned to the installer within 50 – 100 miles of use for a visual inspection, and recheck for proper tire inflation and torque specifications.

360 View

Gallery

Chevy Silverado 17" VR-602 Tungsten Graphite

The Venomrex VR-602 Finished in Highland Bronze

Online pre-orders will ship by December 31st 2020

The Venomrex 602 combines our distinct and innovative design methods with the robust and rugged styling of traditional truck wheels. Our engineers have utilized the design elements to create one of the lightest 17" Flow Forged wheels available. The VR-602 is designed for on and off road use for the the Ford F150 (2009+), the Ford Raptor, the Toyota Tacoma, the Toyota 4Runner, the Toyota FJ Cruiser, the Chevrolet Silverado and the GMC Sierra 1500.

The Toyota Tacoma and 4Runner wheel applications are hub-centric at 106.2 millimeters. The 12x1.5 Spline Lug Nut Kit offered by Venomrex for Toyota applications receive 5.5 turns when installed properly, approved within OEM Toyota specs. Running Venomrex Wheels with the Venomrex Spline Lug Nut Kit on all Toyota applications has been thoroughly tested on and off road with no known issues.

Product Details

Product Info
Venom Rex 602
17" X 9"
ET -12 (Toyota/Chevy/GMC)
ET 12 (Ford)
Highland Bronze Finish
Flow Forged All Terrain Wheel
Guarantee Fitment

Vehicle Applications
2009+ F150
2009-2014 Raptor
2017 Raptor
2002+ Toyota Tacoma
2002+ Toyota 4Runner
2007+ FJ Cruiser
2007+ Chevrolet Silverado 1500
2007+ GMC Sierra 1500
2019 Dodge Ram

Wheel Spec
Size: 17X9.0
PCD: 6X139.7 (Toyota/Chevy/GMC)
PCD: 6X135 (Ford)
Offset: ET -12 (Toyota/Chevy/GMC)
Offset: ET 12 (Ford)
Backspacing: 5.5" (Ford)
Backspacing: 4.5" (Toyota/Chevy/GMC/Dodge)
Bore: 87.1 (Ford)
Bore: 106 (Toyota/Chevy/GMC/Dodge)
Load Rating: 2,645 lbs

Warranty

With proper care, professional installation, and an assumption of reasonable use on public roads & highways, Vorsteiner Flow Forged Wheels carry a Lifetime Warranty against manufacturer and structural defect. In addition, Vorsteiner offers a full 2-Year cosmetic warranty on the factory painted finish.

All warranty claims will be limited to product repair or replacement at Vorsteiner’s discretion, and does not include reimbursement for any costs associate with labor, shipping, transportation, or loss of use. Claims will only be accepted with a dated proof of purchase and must be processed through the original dealer or distributor where the wheels were purchased and installed. Warranty is only valid to the original purchaser and must have been installed by an Authorized Vorsteiner Dealer.

Installation Instructions

1. Test fit each wheel (front and rear) before mounting and balancing any tires in order to ensure proper fitment to the vehicle as well as for adequate clearance between any brake and/or suspension components. Returns or exchanges will not be approved based on fitment after tires have been mounted to the wheels.
2. Observe the tire manufacturer’s suggested tire size based on rim width. Clearance between fenders, fender linings, and suspension components should be checked before mounting opposite side tire. Before the vehicle is released to the customer, the vehicle should be checked for tire interference while on the rack, as well as on the road by driving at slow speeds (up to 10 mph) and turning in both directions at full steering lock.
3. All Venomrex wheels are engineered applications specific for use with factory hardware. The use of hub centric rings, spacers, or adaptors to alter the fitment of the wheel is not authorized by Venomrex. When fitted to vehicles not properly validated or approved by our engineers, the installer will be fully responsible for the performance and final outcome.
4. Tires should not be inflated in excess of 50 psi in order to seat the tire bead. Please follow the tire manufacturer’s recommended driving pressures before releasing the vehicle to the customer.
5. Wheel bolts/lugs should be tightened by hand, in a progressive crisscross pattern, and without the use of air powered or electric impact wrenches. Always follow the vehicle manufacturer’s recommended torque specifications. All wheels should be fully torqued after the full weight of the vehicle is lowered onto the suspension.
6. Please ensure that the vehicle is returned to the installer within 50 – 100 miles of use for a visual inspection, and recheck for proper tire inflation and torque specifications.

360 View

Gallery

Toyota Tacoma VR-602 Highland Bronze

The Venomrex VR-501 Finished in Mystic Black

Online pre-orders will ship by December 31st 2020

The Venomrex 501 combines our distinct and innovative design methods with the robust and rugged styling of traditional truck wheels. Our engineers have utilized the design elements to create one of the lightest 20" Flow Forged wheels available. The VR-501 is designed for on and off road use for the the Jeep Wrangler JK 2007+, Jeep Wrangler JL 2018+ and Toyota Tundra 2007+.

Product Details

Product Info
Venom Rex 501
20" X 9"
ET -6 (Jeep)
ET 18 (Toyota)
Mystic Black
Flow Forged All Terrain Wheel
Guarantee Fitment

Vehicle Applications
Jeep Wrangler JK 2007+
Jeep Wrangler JL 2018+
Toyota Tundra 2007+

Wheel Specs
Size: 20X9.0
PCD: 5X127 (Jeep)
PCD: 5X150 (Toyota)
Offset: -6 (Jeep)
Offset: 18 (Toyota)
Backspacing: 5.5"
Bore: 87
Load Rating: 2,600 lbs

Warranty

With proper care, professional installation, and an assumption of reasonable use on public roads & highways, Vorsteiner Flow Forged Wheels carry a Lifetime Warranty against manufacturer and structural defect. In addition, Vorsteiner offers a full 2-Year cosmetic warranty on the factory painted finish.

All warranty claims will be limited to product repair or replacement at Vorsteiner’s discretion, and does not include reimbursement for any costs associate with labor, shipping, transportation, or loss of use. Claims will only be accepted with a dated proof of purchase and must be processed through the original dealer or distributor where the wheels were purchased and installed. Warranty is only valid to the original purchaser and must have been installed by an Authorized Vorsteiner Dealer.

Installation Instructions

1. Test fit each wheel (front and rear) before mounting and balancing any tires in order to ensure proper fitment to the vehicle as well as for adequate clearance between any brake and/or suspension components. Returns or exchanges will not be approved based on fitment after tires have been mounted to the wheels.
2. Observe the tire manufacturer’s suggested tire size based on rim width. Clearance between fenders, fender linings, and suspension components should be checked before mounting opposite side tire. Before the vehicle is released to the customer, the vehicle should be checked for tire interference while on the rack, as well as on the road by driving at slow speeds (up to 10 mph) and turning in both directions at full steering lock.
3. All Venomrex wheels are engineered applications specific for use with factory hardware. The use of hub centric rings, spacers, or adaptors to alter the fitment of the wheel is not authorized by Venomrex. When fitted to vehicles not properly validated or approved by our engineers, the installer will be fully responsible for the performance and final outcome.
4. Tires should not be inflated in excess of 50 psi in order to seat the tire bead. Please follow the tire manufacturer’s recommended driving pressures before releasing the vehicle to the customer.
5. Wheel bolts/lugs should be tightened by hand, in a progressive crisscross pattern, and without the use of air powered or electric impact wrenches. Always follow the vehicle manufacturer’s recommended torque specifications. All wheels should be fully torqued after the full weight of the vehicle is lowered onto the suspension.
6. Please ensure that the vehicle is returned to the installer within 50 – 100 miles of use for a visual inspection, and recheck for proper tire inflation and torque specifications.

Gallery

Jeep Wrangler JL VR-501 Coal Black

The Venomrex VR-501 Finished in Carbon Graphite

Online pre-orders will ship by December 31st 2020

The Venomrex 501 combines our distinct and innovative design methods with the robust and rugged styling of traditional truck wheels. Our engineers have utilized the design elements to create one of the lightest 20" Flow Forged wheels available. The VR-501 is designed for on and off road use for the the Jeep Wrangler JK 2007+, Jeep Wrangler JL 2018+ and Toyota Tundra 2007+.

Product Details

Product Info
Venom Rex 501
20" X 9"
ET -6 (Jeep)
ET 18 (Toyota)
Carbon Graphite
Flow Forged All Terrain Wheel
Guarantee Fitment

Vehicle Applications
Jeep Wrangler JK 2007+
Jeep Wrangler JL 2018+
Toyota Tundra 2007+

Wheel Specs
Size: 20X9.0
PCD: 5X127 (Jeep)
PCD: 5X150 (Toyota)
Offset: -6 (Jeep)
Offset: 18 (Toyota)
Backspacing: 5.5"
Bore: 87
Load Rating: 2,600 lbs

Warranty

With proper care, professional installation, and an assumption of reasonable use on public roads & highways, Vorsteiner Flow Forged Wheels carry a Lifetime Warranty against manufacturer and structural defect. In addition, Vorsteiner offers a full 2-Year cosmetic warranty on the factory painted finish.

All warranty claims will be limited to product repair or replacement at Vorsteiner’s discretion, and does not include reimbursement for any costs associate with labor, shipping, transportation, or loss of use. Claims will only be accepted with a dated proof of purchase and must be processed through the original dealer or distributor where the wheels were purchased and installed. Warranty is only valid to the original purchaser and must have been installed by an Authorized Vorsteiner Dealer.

Installation Instructions

1. Test fit each wheel (front and rear) before mounting and balancing any tires in order to ensure proper fitment to the vehicle as well as for adequate clearance between any brake and/or suspension components. Returns or exchanges will not be approved based on fitment after tires have been mounted to the wheels.
2. Observe the tire manufacturer’s suggested tire size based on rim width. Clearance between fenders, fender linings, and suspension components should be checked before mounting opposite side tire. Before the vehicle is released to the customer, the vehicle should be checked for tire interference while on the rack, as well as on the road by driving at slow speeds (up to 10 mph) and turning in both directions at full steering lock.
3. All Venomrex wheels are engineered applications specific for use with factory hardware. The use of hub centric rings, spacers, or adaptors to alter the fitment of the wheel is not authorized by Venomrex. When fitted to vehicles not properly validated or approved by our engineers, the installer will be fully responsible for the performance and final outcome.
4. Tires should not be inflated in excess of 50 psi in order to seat the tire bead. Please follow the tire manufacturer’s recommended driving pressures before releasing the vehicle to the customer.
5. Wheel bolts/lugs should be tightened by hand, in a progressive crisscross pattern, and without the use of air powered or electric impact wrenches. Always follow the vehicle manufacturer’s recommended torque specifications. All wheels should be fully torqued after the full weight of the vehicle is lowered onto the suspension.
6. Please ensure that the vehicle is returned to the installer within 50 – 100 miles of use for a visual inspection, and recheck for proper tire inflation and torque specifications.

The Venomrex VR-501 Finished in Desert Bronze

Online pre-orders will ship by December 31st 2020

The Venomrex 501 combines our distinct and innovative design methods with the robust and rugged styling of traditional truck wheels. Our engineers have utilized the design elements to create one of the lightest 20" Flow Forged wheels available. The VR-501 is designed for on and off road use for the the Jeep Wrangler JK 2007+, Jeep Wrangler JL 2018+ and Toyota Tundra 2007+.

Product Details

Product Info
Venom Rex 501
20" X 9"
17" X 9"
ET -6 (Jeep)
ET 18 (Toyota)
Desert Bronze
Flow Forged All Terrain Wheel
Guarantee Fitment

Vehicle Applications
Jeep Wrangler JK 2007+
Jeep Wrangler JL 2018+
Toyota Tundra 2007+

Wheel Specs
Size: 20X9.0
PCD: 5X127 (Jeep)
PCD: 5X150 (Toyota)
Offset: -6 (Jeep)
Offset: 18 (Toyota)
Backspacing: 5.5"
Bore: 87
Load Rating: 2,600 lbs

Warranty

With proper care, professional installation, and an assumption of reasonable use on public roads & highways, Vorsteiner Flow Forged Wheels carry a Lifetime Warranty against manufacturer and structural defect. In addition, Vorsteiner offers a full 2-Year cosmetic warranty on the factory painted finish.

All warranty claims will be limited to product repair or replacement at Vorsteiner’s discretion, and does not include reimbursement for any costs associate with labor, shipping, transportation, or loss of use. Claims will only be accepted with a dated proof of purchase and must be processed through the original dealer or distributor where the wheels were purchased and installed. Warranty is only valid to the original purchaser and must have been installed by an Authorized Vorsteiner Dealer.

Installation Instructions

1. Test fit each wheel (front and rear) before mounting and balancing any tires in order to ensure proper fitment to the vehicle as well as for adequate clearance between any brake and/or suspension components. Returns or exchanges will not be approved based on fitment after tires have been mounted to the wheels.
2. Observe the tire manufacturer’s suggested tire size based on rim width. Clearance between fenders, fender linings, and suspension components should be checked before mounting opposite side tire. Before the vehicle is released to the customer, the vehicle should be checked for tire interference while on the rack, as well as on the road by driving at slow speeds (up to 10 mph) and turning in both directions at full steering lock.
3. All Venomrex wheels are engineered applications specific for use with factory hardware. The use of hub centric rings, spacers, or adaptors to alter the fitment of the wheel is not authorized by Venomrex. When fitted to vehicles not properly validated or approved by our engineers, the installer will be fully responsible for the performance and final outcome.
4. Tires should not be inflated in excess of 50 psi in order to seat the tire bead. Please follow the tire manufacturer’s recommended driving pressures before releasing the vehicle to the customer.
5. Wheel bolts/lugs should be tightened by hand, in a progressive crisscross pattern, and without the use of air powered or electric impact wrenches. Always follow the vehicle manufacturer’s recommended torque specifications. All wheels should be fully torqued after the full weight of the vehicle is lowered onto the suspension.
6. Please ensure that the vehicle is returned to the installer within 50 – 100 miles of use for a visual inspection, and recheck for proper tire inflation and torque specifications.

Gallery

Jeep JL VR-501 Highland Bronze

The Venomrex VR-501 Finished in Coal Black

Online pre-orders will ship by December 31st 2020

The Venomrex 501 combines our distinct and innovative design methods with the robust and rugged styling of traditional truck wheels. Our engineers have utilized the design elements to create one of the lightest 20" Flow Forged wheels available. The VR-501 is designed for on and off road use for the the Jeep Wrangler JK 2007+, Jeep Wrangler JL 2018+ and Toyota Tundra 2007+.

Product Details

Product Info
Venom Rex 501
17" X 9"
ET -6 (Jeep)
ET 18 (Toyota)
ET -12 (Dodge)
Coal Black
Flow Forged All Terrain Wheel
Guarantee Fitment

Vehicle Applications
Jeep Wrangler JK 2007+
Jeep Wrangler JL 2018+
Toyota Tundra 2007+
Dodge Ram 1500 2002-2018

Wheel Specs
Size: 17X9.0
PCD: 5X127 (Jeep)
PCD: 5X150 (Toyota)
Offset: -6 (Jeep)
Offset: 18 (Toyota)
Offset: -12 (Dodge)
Backspacing: 5.5"
Bore: 87
Load Rating: 2,600 lbs

Warranty

With proper care, professional installation, and an assumption of reasonable use on public roads & highways, Vorsteiner Flow Forged Wheels carry a Lifetime Warranty against manufacturer and structural defect. In addition, Vorsteiner offers a full 2-Year cosmetic warranty on the factory painted finish.

All warranty claims will be limited to product repair or replacement at Vorsteiner’s discretion, and does not include reimbursement for any costs associate with labor, shipping, transportation, or loss of use. Claims will only be accepted with a dated proof of purchase and must be processed through the original dealer or distributor where the wheels were purchased and installed. Warranty is only valid to the original purchaser and must have been installed by an Authorized Vorsteiner Dealer.

Installation Instructions

1. Test fit each wheel (front and rear) before mounting and balancing any tires in order to ensure proper fitment to the vehicle as well as for adequate clearance between any brake and/or suspension components. Returns or exchanges will not be approved based on fitment after tires have been mounted to the wheels.
2. Observe the tire manufacturer’s suggested tire size based on rim width. Clearance between fenders, fender linings, and suspension components should be checked before mounting opposite side tire. Before the vehicle is released to the customer, the vehicle should be checked for tire interference while on the rack, as well as on the road by driving at slow speeds (up to 10 mph) and turning in both directions at full steering lock.
3. All Venomrex wheels are engineered applications specific for use with factory hardware. The use of hub centric rings, spacers, or adaptors to alter the fitment of the wheel is not authorized by Venomrex. When fitted to vehicles not properly validated or approved by our engineers, the installer will be fully responsible for the performance and final outcome.
4. Tires should not be inflated in excess of 50 psi in order to seat the tire bead. Please follow the tire manufacturer’s recommended driving pressures before releasing the vehicle to the customer.
5. Wheel bolts/lugs should be tightened by hand, in a progressive crisscross pattern, and without the use of air powered or electric impact wrenches. Always follow the vehicle manufacturer’s recommended torque specifications. All wheels should be fully torqued after the full weight of the vehicle is lowered onto the suspension.
6. Please ensure that the vehicle is returned to the installer within 50 – 100 miles of use for a visual inspection, and recheck for proper tire inflation and torque specifications.

Gallery

Jeep Wrangler JL 17" VR-501 Coal Black